| 1. | Scanning rate 100 1000mm
扫描频率100 1000厘米 |
| 2. | Scanning rate 150times sec
扫描频率每秒150次 |
| 3. | Scanning rate 200times sec
扫描频率每秒200次 |
| 4. | Scanning rate : 2ms
扫描速度2ms - 50ms可设定 |
| 5. | The results showed that increasing scan rate and decreasing laser power can minish balling effect to a certain extent
研究表明，适当提高扫描速度或减小激光功率可以在一定程度上减小316不锈钢粉末激光烧结的球化效应。 |
| 6. | From there , you may need to adjust the scan rate a setting that the powerstrip tool allows you to modify until you get a stable picture
从这里开始，可能需要修改扫描频率（ powerstrip工具可以修改这个设置） ，直到获得稳定的图像为止。 |
| 7. | The balling effect of 316 stainless steel powder was studied , and the effects of process parameters , such as laser power , scan rate , and layer thickness , on the success of laser sintering were discussed
分析了316不锈钢粉末球化效应产生的原因，讨论了工艺参数（激光功率、扫描速度和粉层厚度）对316不锈钢金属粉末烧结成形的影响。 |
| 8. | Second , carbon nanotube ( cnt ) was used in the fabrication of xanthine oxidase ( xod ) biosensor . xod / cnt / gc electrode was fabricated . the influences of cnt , ph and scan rate to the electrode were discussed
系统地研究了ph 、扫速对hrp酶电极电化学性能的影响,优化了电极的制备条件,实现了hrp酶电极对h2o2的响应,并考察了电极的稳定性。 |
| 9. | Scan speed ’ s affection for cable corrosion speed is studied , it is founded that the rapider the scanning rate , the bigger the measured corrosion current density , that is the quicker the corrosion rate , 8mv / s is the best scan speed . 2
研究了扫描速度对钢绞线腐蚀速度的影响;提出了扫描速度越大,钢绞线腐蚀电流密度也越大,腐蚀速度越快,其中8mv / s为最佳扫描速度。 |
| 10. | Compared with conventional ssr , the prm has no scan rate restrictions , thus capable of providing a much faster update rate ( up to 0 . 5 second ) , better target presentation in terms of accuracy , resolution , and track prediction
与传统的二次监察雷达相比，精密跑道监察系统的功能不受扫描速度限制，故更新速度可快许多（最快达０ ５秒） ，而且在准确度、清晰度及航迹预测等方面，均达到更佳的目显示效果。 |
